47
FUNCTIONS
8-5 NORMAL PRINT
[NORMAL PRINT MODE]
In the [NORMAL PRINT MODE], the pitch print function is not available. In this mode,
the maximum total printing length is 300mm.
Deleting
in the [INPUT screen].
8-5-1 PRINTING LENGTH
Setting the total length of the document.
Note: Make sure “AUTO” is “OFF” in the [PRINTING LENGTH setting screen]. When “AUTO”
is “ON,” “PRINTING LENGTH” cannot be manually changed. (The “LENGTH” is shown as
“
.“)
1. Press SHIFT
SIZE (TP/LNG) to display
the [PRINTING LENGTH setting screen].
2.
LENGTH.” Press ENTER .
And then the [MARGIN setting screen] appears.
8-5-2 MARGIN
Setting the left and right “MARGIN” of a document.
1. After setting the “PRINTING LENGTH,” the
[MARGIN setting screen] appears.
2.
MARGIN.” Press ENTER .
Setting range: “LENGTH” = 10 300mm, “AUTO” = ON, OFF
Setting range: 2 30mm
[PITCH PRINT MODE]
[
NORMAL PRINT MODE]
To Next Page
Loading...
