Max LM-550A2 Series - Normal Print on the Tape

35
BASIC OPERATION
6-2-2 NORMAL PRINT ON THE TAPE
Printing the following contents on the tape.
MAX LETATWIN
LM-550A/PC
1. Set “MATERIAL=TAPE” and “SIZE=12mm” in the [PRINTED MATERIAL setting screen].
2. [INPUT screen] appears. Make sure that the arrow symbol “
” is indicating “A” = capital letters.
Press / key to move the cursor to
.
3. In order to change to [NORMAL PRINT M ODE],
press
DELET to delete
. (See 8-5: NORMAL
PRINT)
4. Press SHIFT
SIZE (TP/LNG)
and set
“PRINTING LENGTH.” (See 8-5-1: Printing
length)
Press / key to select “AUTO=OFF.”
set the “LENGTH” and input
4 0 .
5. Press ENTER .
[MARGIN setting screen] appears.
Press ENTER .
40mm
12mm
B