16
BEFORE USE
The meanings of edit symbols displayed on the screen are as follows.
(1)
: Represents the [PITCH PRINT MODE] activated. Represents a group of blocks
with same pitch length until next [P] symbol. (See 8-4: PITCH PRINT)
(2)
: Represents the block. Up to 999 blocks can be input in an entire document.
(See 8-4: PITCH PRINT)
(3)
: Represents the line feed.
(Printing on tubes)
1 3.6 : Only 1 line can be set.
4.2 to
8.0 : Up to 2 lines can be set, provided 2mm
character size is used. (for
4.2 tubes,
the line space must be set to CNT (contact.)
5.2 to 8.0 : Up to 3 lines can be set, provided 1.3 mm
character size is used. (for
5.2 tubes,
t
Underline and frame are set appropriately.
Underline and frame are set appropriately.
he line space must be set to CNT (contact.)
(Printing on tapes) U
2mm or 1.3mm
p to 3 lines can be set, provided 9mm and 12mm tape and
character size are used.
(4)
: Represents the SEQUENCE is set. (See 8-9: SEQUENCE)
4-6 SELECTING THE SCREEN LANGUAGE
Multiple screen languages can be selected, according to the model type of your machine.
Model type Language
LM-550A2/PC A11-T
LM-550A2BH/PC A11
English or Chinese(T) (Traditional Chinese Character)
LM-550A2/PC A12-C
LM-550A2BH/PC A12-C
LM-550A2/PC A12-TH
LM-550A2/PC BS
LM-550A2/PC SASO
LM-550A2/PC C72
LM-550A2/PC (IND)
LM-550A2B/PC (IND)
English or Chinese(C) (Simplified Chinese Character)
LM-550A2BH/PC CE
English, German, French, Italian, Spanish,
Polish, Russian, or Turkish
[HOW TO SELECT]
1. Turn the power on, while pressing L and G at the same time.
The [LANGUAGE MODE screen] appears after displaying the LETATWIN logotype.
[LANGUAGE MODE screen]
ENTER , the power supply
automatically turns off.
3. Turn the power on again, then it starts up with the language selected.
Note:
hen selecting English, you can neither input nor print Chinese characters.
To Next Page
Loading...
