17
BEFORE USE
4-7 CLEANING THE PLATEN ROLLER OR REMOVING JAMMED TUBE
(“FEED” function)
1. Open the cassette cover.
2. While pressing C , press ON/OFF for
about 3 seconds.
Then, release ON/OFF first while
displaying the logo of “LETATWIN.”
3. [FEED screen] appears.
4. Slide the switching lever (silver) to the right
until it stops, as shown in the figure.
5. Put wet cloth with water or alcohol to the
platen roller and clean it using / key.
Note: If the tube is jammed, remove the consumables using this “FEED” function. Do not pull
the tube by hand.
To Next Page
Loading...
