.
Setting Shutter Speed Priority
In this mode, pictures are taken with the priority given to shutter speed. The
camera sets the aperture value automatically.
1
Rotate the mode dial to Shutter Speed
Priority " ".
2
Rolling "Adjustment Dial" to set the
shutter speed (2.0sec~ 1/2000sec) and the
camera sets the aperture value automatically.
3
If you want to adjust the EV value, press
on the four-way (EV value will be selected
and light red) and then roll the "Adjustment
Dial" to adjust EV value.
4
Frame your subject with the viewfinder or
the LCD monitor. Slightly press the shutter
release button halfway down and then press
the shutter release button all the way
down to take the picture.
Note: When appears on the LCD monitor, we
recommend you use a tripod to avoid
taking blurry pictures caused by hand
shake.
To Next Page
Loading...
Need help?
General
