65
UsingthePlaybackMenu
.
Using PictBridge
You can connect the camera directly to a printer
that supports PictBridge, and perform image selec-
tion and printing using the camera monitor screen
and controls.
PictBridge is a standard established by the
Camera and Image Products Association (CIPA).
USB
1
In the SETUP mode, set USB as PictBridge.
(See Page 92)
2
Use the USB cable that comes with the
camera to connect the camera to a PictBridge
compatible printer. After connecting both, the
camera LCD monitor will display as in the left figure.
3
Press or to select "One", then press
"OK".
4
Press or setup copies.
To Next Page
Loading...
