46
.
Setting ISO (Sensitivity)
ISO value affects the camera’s sensitivity to light. The default ISO setting is
"Auto", but you can also adjust the setting manually. Use low ISO value in
bright conditions, and high ISO value when light is insufficient.
Chapter2:TakingPicturesandRecordingVideoClips
1
Turn the mode to
P ,,,, ,
or .
2
Press Menu button " " to enter the
capture menu.
3
Press on the four-way key to select
ISO " ".
4
Press on the four-way key to select
"Auto", "ISO 100", "ISO 200" or "ISO 400".
5
Press "OK" to confirm the setting.
Press Menu button back to still capture.
Note 1: High ISO value may lead to noise in the
picture.
Note 2: ISO speed will be reset to default "Auto"
after you turn off the camera.
To Next Page
Loading...
Need help?
General
