Medion Digital Camera - Setting the Usb Connection Mode

92
.
Setting the USB connection mode
You can change the USB connection mode depending on whether the USB
cable is to be connected to a printer (PICTBRIDGE) or a computer (STORAGE).
1
Rotate the mode dial to Set-Up " " mode.
In the Set-Up menu press or to select
USB" ".
2
Press or to select "STORAGE"or
"PICTBRIDGE".
3
Press "OK" to confirm the setting.
Note : Select PictBridge mode ,
please see page 65.
USB
STORAGE
PICTBRIDGE
Chapter6:AdjustingtheCameraSettings