9
• Do not unplug or remove the battery when the camera is processing data
When image data is being recorded or deleted from memory cards,
cutting off the power could result in loss of data or damage to the internal circuitry
or memory.
• Handle the lens and all moving parts with care
Do not touch the lens and lens barrel. Be careful when handling the memory
card and battery. These parts are not designed for excessive handling.
• Battery
In low temperatures, the battery’s capacity may decrease
significantly due to the inactive chemical reaction. When taking pictures in
cold weather, keep a warm backup battery on hand.
If the battery terminals get dirt or contamination on them, wipe them off
with a dry, clean cloth or use an eraser to remove the stain.
• Memory cards
Turn off the power before inserting or removing the memory card.
Otherwise, the memory card could become unstable.
Memory cards may getting hot during use, remove the memory card from the
camera with care.
This mark on your camera certifies that this camera meets the require-
ments of the EU (European Union) concerning interference causing
equipment regulations. CE stands for Conformité Européenne
(European Conformity).
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference recieved,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Do not remove the ferrite cores from the cables.
FOR HOME OR OFFICE USE
Digital Camera
MD 85060
Tested To Comply
With FCC Standards
To Next Page
Loading...
Need help?
General
