Medion Digital Camera - Page 93

95
Problem
The images are blurry
The images are too
bright
The images are too
dark
Solution
Hold the camera steady or
use a tripod when taking
pictures
Position the focus brackets
on your subject
Set the camera to shoot in
normal focus or macro
focus and then take the
picture again
Use a tripod and turn on
the flash
Softly clean the lens
Turn off the flash
Move back from the
subject and take the
picture again
Avoid pointing the camera
to bright light sources and
use exposure
compensation
Turn on the flash
Turn on the flash
Possible Cause
The camera was moved
when you pressed the
shutter release button
The focus brackets are
not positioned on the
subject
Use macro mode to
shoot subjects within
normal focus, or vice
versa
The light is low and the
flash is off
The lens is dirty
The flash is on when the
subject is bright enough
Too close to the subject
when taking pictures
with the flash on
Subject is much brighter
than the background
The flash is off
The subject is in dark
TroubleShooting