FOCKE MELER GLUING SOLUTIONS
4-16
MELTER OPERATION
Setting the clock
‘micron’ series melters are equipped with a weekly programmable system
controlling equipment connection and disconnection and activating and deac-
tivating the standby function.
Before programming these functions, it is necessary to introduce into the
control unit data corresponding to the day and hour used to execute these
programs.
Programming the current day and hour
1. Press the button with the clock symbol.
A ‘0’ will appear on the display, indicating the program for current day
and hour information.
2. Press the button with the clock symbol once again.
On the left display, you will see the time with a dot, indicating that this
is the value that may be modified, while the minutes appear on the
second display.
3. Use the up-down arrow to select the desired value.
4. Press the button with the clock symbol once again.
Now the dot will appear on the right display.
5. Use the up-down arrow to select the desired value.
6. Press the button with the clock symbol once again.
A number appears, indicating the day of the week (1- Monday / 7- Sun-
day).
7. Use the up-down arrow to select the desired value.
8. Press the button with the clock symbol once again.
The ‘0’ program appears once again.
9. Pressing either the left or the right arrow button will exit this program
and return to the tank temperature display.
To Next Page
Loading...
