Mercury 30 Service Manual

90-826148R2 MARCH 1997 MID-SECTION - 5B-21
MANUAL TILT
To manually tilt the outboard engine, the owner will
need to back out the manual tilt valve (j). With the
valve backed out, the internal passages inside the
manifold are connected together. These passages
connect both the cylinder down and up cavities to-
gether, along with the reservoir (t), allowing the en-
gine to be raised or lowered. Trim ram (b) movement
will continue until the manual tilt valve is closed, lock-
ing the fluid inside of the cylinder and manifold.

Mercury 30 Specifications

General

Horsepower	30 HP
Cylinders	3
Displacement	526 cc
Gear Shift	F-N-R
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20 in
Steering	Remote / Tiller