Mercury 30 Service Manual

POWERHEAD - 4-2990-826148R2 MARCH 1997
Intake/Reed Block Manifold
Installation
1. Place engine on repair stand or on bench.
NOTE: Powerhead repair stand 91-827001A1 can
be used.
2. Install check valve/holder.
52895
a
a - Check Valve/Holder
3. Install reed block manifold and intake manifold
with gasket to cylinder block.
S/N 0G380074 & Below
S/N 0G380075 & Above

Mercury 30 Specifications

General

Horsepower	30 HP
Cylinders	3
Displacement	526 cc
Gear Shift	F-N-R
Fuel Induction System	Electronic Fuel Injection (EFI)
Shaft Length	20 in
Steering	Remote / Tiller