METREL EurotestXC MI 3152 - Devices; Initial Settings

MI 3152(H) EurotestXC (2,5 kV) Instrument operation
40
4.6.6 Devices
In this menu operation with external devices is configured.
Figure 4.12: Device settings menu
Reading devices
Type
Sets appropriate reading device (QR or barcode scanner).
Port
Sets communication port of selected reading device.
Bluetooth device
name
Goes to menu for pairing with selected Bluetooth device.
4.6.7 Initial Settings
In this menu the instrument settings, measurement parameters and limits can be set to initial
(factory) values.
Figure 4.13: Initial settings menu
Warning!
Following customized settings will be lost when setting the instruments to initial settings:
 measurement limits and parameters,
 global parameters, system settings, and Devices in General settings menu,
 opened Workspace will be deselected,
 user will be signed out.
 If the batteries are removed the custom made settings will be lost.