© Microhard Systems Inc. 102
4.0 Configuration
The IP Address and TCP/UDP port which the server is located. This is
generally the Public IP Address of the router/modem where the Server is
running.
Server IP/Port
Values (IP/Port)
(no default)
Root Certificate
The root certificate file (CA file) that all the server and clients must have in
common.
Values (chars)
ca.crt
The maximum resulting UDP send packet size after the OpenVPN has
fully encapsulated data. Packets exceeding this max value will be
fragmented.
MSSFIX/Fragment size
Values (size)
1370
Cleint Certificate
The Client Certificate which is the certificate file that resides on only the
client.
Values (chars)
client.crt
Client Key
The private Client Key, which should not be disclosed.
Values (chars)
client.key
TLS Auth Key
The server and each client must have a copy of this key to do TLS
authentication.
Values (chars)
(no default)
Cipher
Select a cryptographic cipher. Must be the same on Server and
Client.
Values (selection)
DES-CBC
RC2-CBC
DES-EDE-CBC
DES-EDE3-CBC
DESX-CBC
BF-CBC
Use LZO Compression
Enable/Disable LZO compression on the VPN link. Lempel–Ziv–
Oberhumer (LZO) is a lossless data compression algorithm.
Values (selection)
Enable / Disable
RC2-40-CBC
CAST5-CBC
RC2-64-CBC
AES-128-CBC
AES-192-CBC
AES-256-CBC
SEED-CBC
To Next Page
Loading...
