Microhard Systems BulletPlus - Apps; Modbus; TCP Modbus

© Microhard Systems Inc. 133
4.0 Configuration
Image 4-11-1: Apps > Modbus
4.11 Apps
4.11.1 Apps > Modbus
4.11.1.1 Modbus > TCP Modbus
The BulletPlus can be configured to operate as a TCP/IP or Serial (COM) Modbus slave and respond to
Modbus requests and report various information as shown in the Data Map.
Status
Disable or enable the Modbus service on the BulletPlus.
Values (selection)
Disable Service
Enable Service
TCP Mode Status
Disable or enable the Modbus TCP Connection Service on the BulletPlus.
Values (selection)
Disable
Enable