© Microhard Systems Inc. 109
4.0 Configuration
Image 4-7-2: Router > OSPF
4.7.2 Router > OSPF
The BulletPlus is also capable of providing and participating in OSPF (Open Shortest Path First), to
exchange routing information from attached devices. Static routes can also be added in the Network >
Routes menu.
OSPF Status
Enable or disable OSPF routing on the BulletPlus. If enabled the BulletPlus
will exchange routing information on the specified (interfaces) attached
networks.
Values (selection)
Enable / Disable
OSPF Network Announcement Configuration
Each attached network that is to participate with the OSPF exchange must
be specified here. Once added they participating networks are shown in the
list.
Values (Subnet/Length))
(no default)
To Next Page
Loading...
