Microhard Systems BulletPlus - Routes

© Microhard Systems Inc. 44
4.0 Configuration
4.2.6 Network > Routes
Static Routes Configuration
It may be desirable to have devices on different subnets to be able to talk to one another. This can be
accomplished by specifying a static route, telling the BulletPlus where to send data.
Image 4-2-9: Network > Routes
Routes can be names for easy reference, or to describe the route
being added.
Name
Values (characters)
(no default)
Enter the network IP address for the destination.
Destination
Values (IP Address)
(192.168.168.0)
Specify the Gateway used to reach the network specified above.
Gateway
Values (IP Address)
192.168.168.1
Enter the Netmask for the destination network.
Netmask
Values (IP Address)
255.255.255.0