Microhard Systems BulletPlus - NTP Server Settings

© Microhard Systems Inc. 27
4.0 Configuration
Time
The time may be entered in this field. Note that the entered
value is lost should the BulletPlus lose power for some reason.
Values (hh:mm:ss)
11:27:28 (varies)
If connecting to a NTP time server, specify the timezone from
the dropdown list.
Values (selection)
User Defined (or out of date)
POSIX TZ String
This displays the POSIX TZ String used by the unit as
determined by the timezone setting.
Values (read only)
(varies)
NTP Server
Enter the IP Address or domain name of the desired NTP time
server.
Values (address)
pool.ntp.org
NTP Port
Enter the IP Address or domain name of the desired NTP time
server.
Values (port#)
123
Timezone
NTP Client Interval
By default the modem only synchronizes the time and date during
system boot up (default: 0), but it can be modified to synchronize at a
regular interval. This process does consume data and should be set
accordingly.
Values (seconds)
0