© Microhard Systems Inc. 105
4.0 Configuration
Subnet IP Address
The is the IP Address of the remote network, on the remote side of the
GRE Tunnel.
Values (IP Address)
(varies)
Gateway IP Address
Enter the WAN IP Address of the BulletPlus or other GRE supported
device in which a tunnel is to be created with at the remote end.
Values (IP Address)
(varies)
Subnet Mask
The subnet mask for the local network/subnet.
Values (IP Address)
(varies)
Remote Setup
The remote setup tells the BulletPlus about the remote end, the IP address to create the tunnel to, and the
subnet that is accessible on the remote side of the tunnel.
Subnet Mask
The is the subnet mask for the remote network/subnet.
Values (IP Address)
(varies)
IPsec Setup
Refer to the IPsec setup in the VPN Site to Site section of the manual for more information.
To Next Page
Loading...
