Microhard Systems BulletPlus - Page 125

© Microhard Systems Inc. 125
4.0 Configuration
Setup Phone Filter
A phone number filter can be applied to prevent SMS commands not
intended for the BulletPlus from being processed.
Values (selection)
Disable: Accept All
Enable Filter
Motion Trigger
Use this parameter to enable or disable the motion trigger in the BulletPlus.
Values (selection)
Disable
Enable Motion Trigger
When GPS Invalid, Sending Data
Specify what happens when the GPS data is invalid, either use the last
valid position or do not use the last valid position.
Values (selection)
Not Use Last Valid Position
Use Last Valid Position
GpsGate - TCP Mode
Send IO Status
When enabled, the BulletPlus will send the current status of the Digital I/O
inputs and/or outputs to the GpsGate Server.
Values (selection)
Disable
Send Input Status
Send Output Status
Send Input&Output Status
Image 4-10-5: GPS > GpsGate TCP Mode