Microhard Systems BulletPlus - Page 130

© Microhard Systems Inc. 130
4.0 Configuration
Record Time Range
Check the boxes next to the records listed above that are to be sent to the
server.
Values (selection)
(no default)
Send Mode / Protocol
Specify the data format / protocol type for the data to be sent.
Values (selection)
NMEA via UDP
NMEA via TCP
GpsGate via UDP
GpsGate via TCP
Plain Text via UDP
Plain Text via TCP
Server Address/IP
Enter the address or IP address of the remote server to which the data is to
be sent.
Values (IP)
nms.microhardcorp.com
Server Port
Enter the UDP/TCP port number of the remote server to which the data is
to be sent.
Values (Port)
30175