Microhard Systems BulletPlus - Page 166

© Microhard Systems Inc. 166
5.0 AT Command Line Interface
AT+MSCNTO
Command Syntax (Effect: AT&W)
Sets the timeout value for the serial and telnet
consoles. Once expired, user will be return to login
prompt.
AT+MSCNTO=<Timeout_s>
0 - Disabled
0 - 65535 (seconds)
Description
Example
Input:
AT+MSCNTO=300 <enter>
Response:
OK
AT+MSPWD
Command Syntax (Effect: Immediate)
Used to set or change the ADMIN password.
AT+MSPWD=<New password>,<confirm
password>
password: at least 5 characters
Description
Example
Input:
AT+MSPWD=admin,admin<enter>
Response:
OK
AT+MSGMI
Command Syntax
Get Manufacturer Identification
AT+MSGMI=<enter>
Description
Example
Input:
AT+MSGMI<enter>
Response:
+MSGMI: 2014-2015 Microhard Systems Inc.
OK