Microhard Systems BulletPlus - Page 168

© Microhard Systems Inc. 168
5.0 AT Command Line Interface
AT+MSMNAME
Command Syntax (Effect: AT&W)
Modem Name / Radio Description. 30 chars.
AT+MSMNAME=<modem_name>
Description
Example
Input: (To set value)
AT+MSMNAME=BulletPlus-Test<enter>
Response:
OK
Input: (To retrieve value)
AT+MSMNAME?<enter>
Response:
Host name:BulletPlus-Test
OK
AT+MSRTF
Command Syntax (Effect: Immediate)
Reset the modem to the factory default settings from
non-volatile memory.
AT+MSRTF=<Action>
Action:
0 pre-set action
1 confirm action
Description
Example
Input: (To set value)
AT+MSRTF=1<enter>
Response:
OK
AT+MSREB
Command Syntax (Effect: Immediate)
Reboot the modem.
AT+MSREB <enter>
Description
Example
Input:
AT+MSREB <enter>
Response:
OK. Rebooting...