Microhard Systems BulletPlus - Page 183

© Microhard Systems Inc. 183
5.0 AT Command Line Interface
AT+MFMAC
Command Syntax
Get/Set firewall MAC List
AT+MFMAC[=<Name>[,<Operation>[,<Action>,<Mac Address>]]]
Parameters:
Name: Name of firewall MAC list name, 1 - 64 characters
Operation: ADD - Add a firewall MAC list
EDIT - Edit a firewall MAC list
DEL - Delete a firewall MAC list
Action: 0 - Accept
1 - Drop
2 - Reject
MAC Address : Valid MAC address
Usage:
AT+MFMAC
AT+MFMAC=<Name>
AT+MFMAC=<Name>,DEL
AT+MFMAC=<Name>,ADD,<Action>,<Mac Address>
AT+MFMAC=<Name>,EDIT,<Action>,<Mac Address>
Description
Example
Input:
AT+MFMAC=mac1,add,1,00:0A:0A:0A:0B:FF<enter>
Response:
OK
Input:
AT+MFMAC?
Response:
Name: mac1
Action: DROP
MAC address: 00:0A:0A:0A:0B:FF
OK