Microhard Systems BulletPlus - Page 187

© Microhard Systems Inc. 187
5.0 AT Command Line Interface
AT+MMPOWERIN
Command Syntax
Get modem’s input voltage.
AT+MMPOWERIN <enter>
Description
Example
Input:
AT+MMPOWERIN<enter>
Response:
+MMPOWERIN: 12.27
OK
AT+MMBOARDTEMP
Command Syntax
Get modem’s temperature.
AT+MMBOARDTEMP <enter>
Description
Example
Input:
AT+MMBOARDTEMP<enter>
Response:
+MMBOARDTEMP: 46.65
OK
AT+MMWANIP
Command Syntax
Get modem’s WAN IP Address (Carrier).
AT+MMWANIP <enter>
Description
Example
Input:
AT+MMWANIP<enter>
Response:
+MMWANIP: 184.151.220.2
OK