Microhard Systems BulletPlus - Page 190

© Microhard Systems Inc. 190
5.0 AT Command Line Interface
AT+MMMGL
Command Syntax (Immediate)
List all SMS messages.
AT+MMMGL<enter>
Description
Example
Input:
AT+MMMGL<enter>
Response:
+CMGL: 1,"REC READ","+19022060349",,"15/11/14,23:41:39-20"
Test Message
+CMGL: 6,"REC READ","+14036129217",,"15/09/23,15:07:04-16"
This is also a test.
OK
AT+MMMGD
Command Syntax (Immediate)
Delete SMS messages from system.
AT+MMMGD=<index>
<Index> : the index of the message to be deleted
Description
Example
Input:
AT+MMMGD=12<enter>
Response:
OK
AT+MMSCMD
Command Syntax (Effect: AT&W)
GET/SET system SMS command service.
AT+MMSCMD=<Mode>[,<Filter Mode>[,<Phone
No.1>[,...,<Phone No.6>]]]
Mode:
0 Disable
1 Enable SMS Command
Filter Mode:
0 Disable
1 Enable Phone Filter
Description
Example
Input:
AT+MMSCMD=1 <enter>
Response:
OK