Microhard Systems BulletPlus - Page 194

© Microhard Systems Inc. 194
5.0 AT Command Line Interface
AT+MCCT2
Command Syntax (Effect: AT&W)
Set Comport character timeout.
AT+MCCT2=<timeout_s>
(0 to 65535 seconds)
Description
Example
Input:
AT+MCCT2=0<enter>
Response:
OK
AT+MCMPS2
Command Syntax (Effect: AT&W)
Get/Set Serial port maximum packet size.
AT+MCMPS2=<size>
size: 0 to 65535
Description
Example
Input:
AT+MCMPS2=1024<enter>
Response:
OK
AT+MCNCDI2
Command Syntax (Effect: AT&W)
Enable/Disable Serial port no-connection data
intake.
AT+MCNCDI2=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MCNCDI2=1<enter>
Response:
OK