Microhard Systems BulletPlus - Page 99

© Microhard Systems Inc. 99
4.0 Configuration
Select the Tunnel Protocol to be used. The options are TCP and UDP, the
default is UDP.
Tunnel Protocol
Values (selection)
TCP / UDP
Root Certificate
The root certificate file (CA file) that all the server and clients must have in
common.
Values (chars)
ca.crt
Public Server Certificate
The Public Server Certificate which is the certificate file that resides on only
the server.
Values (chars)
server.crt
Private Server Key
The private Server Key, which should not be disclosed.
Values (chars)
server.key
The maximum resulting UDP send packet size after the OpenVPN has
fully encapsulated data. Packets exceeding this max value will be
fragmented.
MSSFIX/Fragment size
Values (size)
1370
TLS Auth Key
The server and each client must have a copy of this key to do TLS
authentication.
Values (chars)
(no default)
Diffie hellman parameter
Select between 1024 bit and 2048 bit Diffie Hellman keys for security.
Values (selection)
DH2048 / DH1024
Server Virtual Subnet / Subnet Mask
The subnet and subnet mask that the server will create to assign address
to itself and the clients.
Values (IP Address)
10.8.0.0
User/Password Authenication
Select the OpenVPN username as setup/defined in the VPN Users menu.
Values (selection)
(no default)