190- (sample file) Error opening file (name): (error). Reports cannot be pro-
duced.
Cause: An error occurred while the program was opening a file neces-
sary to the report operation.
Action: Use the name given in the error message to investigate. Contact
your service representative if you continue to receive this error
message.
191- (sample file) Error parsing reports from file (name). Reports cannot be
produced.
Cause A: The system was unable to create the usual temporary files dur-
ing the report, possibly due to insufficient disk space.
Action A: Check the space available on the hard disk.
Cause B: An internal processing error occurred.
Action B: Contact your service representative.
198- Print job (name) has been cancelled due to insufficient disk space. De-
lete unnecessary files and restart the report.
Cause: The disk drive does not have enough space for the temporary
file required by the Windows Print Manager. Therefore, printing
of the requested report has been canceled.
Action: Delete unnecessary files from the disk. At least five megabytes
of free space are required for normal operation.
199- Print job (name) has been cancelled.
Cause: The requested print job was canceled at your request.
Action: None required.
400- The communications port specified for the SmartPrep(s) is not physi-
cally installed in the Control Module. Cannot initialize.
Cause: The communications port associated with this unit was not valid.
Action: Run the setup program and set up the unit on a valid port.
SmartPrep Error Messages
Aug 98 B-7
To Next Page
Loading...
