136 Chapter 14: Monitors And Communications
PRO6 Live Audio System
Owner’s Manual
>> To select the internal talk mic
1 In the talk mic section of the master bay, press TALK (internal) to switch in the
talk mic section (see “Talk mic” on page 135).
2 In the source a or source b section of the master bay, press TALK. Your
chosen section will determine which system bus (A or B) the talk mic will be
sourced from (see “Monitor output (a and b) sections” on page 201 and “source
(a and b) sections” on page 202).
External talkback
The external talkback input is a mic/line input at the stage end of the system that,
when enabled in the monitor section (see “Monitor output (a and b) sections” on
page 201), can mix onto the local monitor outputs.
To Next Page
Loading...
