Technical specifications 345
PRO6 Live Audio System
Owner’s Manual
Technical specifications
Audio
Frequency response +1, -2dB (20Hz to 12kHz)
Dynamic range 85dB typical
Digital
Arithmetic processor 32-bit
Reverberation Hall, Plate, Chamber and Room, with five variations of each
Effects Alive, Non-Linear, Reverse, Delay, ADT, Multitap Echo,
Sound-On-Sound and Infinite Room
Parameters
Pre-delay 0 to 990ms
Pattern (density) Adjustable 0 to 9 increments (Grainy to Dense)
Level (depth) Adjustable 0 to 9 increments (Distant to Close)
Decay time 0.1 to 18 seconds
Room size 8 to 90 metres linear dimension
LF decay Adjustable ±7 increments ref.
1kHz decay time
HF decay Adjustable ±7 increments ref.
1kHz decay time
Since the above reverberation parameters are optimised to ensure authentic acoustical
simulation, they are by necessity program-dependent.
Controls
Input mute Removes audio feed from reverberation section.
Reverb mute Clears unwanted reverberant signal.
Input level control From 6dB gain to infinite attenuation.
Headroom indicator 10-point LED display, 0dB to -27dB.
Display Simultaneous display of all parameter information.
Parameter selection and store functions are verified by
individual LEDs.
To Next Page
Loading...
