Midas PRO6 User Manual

260 Chapter 30: Inputs
PRO6 Live Audio System
Owner’s Manual
Input metering
The Meters screen (default on the master bay GUI screen) shows all of the meters all
of the time.
Meters can be switched globally to monitor the raw A/D input point, and are also
individually switchable using the meter CHECK (meter) button in the gain trim
section (see “Mic amp input gain (preliminary input processing)” on page 264).
1 20-segment LED signal level meter
‘cluster’. Defaults to monitor pre-fader signal
level. Meter range is +21dB to -36dB, in 3dB
increments.
2 Seven-segment LED gain reduction
meter, monitors the amount of gain reduction
when using a compressor. Meter range is 1dB
to 20dB, in varying increments.
3 Seven-segment LED gate meter, monitors
the amount of gain reduction when using a
gate. Meter range is 5dB to 35dB, in 5dB
increments.
4 PRE (global meter) switch, switches all
input to monitor the raw A/D input point.
1
3
2
Input channel meters
4

Midas PRO6 Specifications

General

Brand	Midas
Model	PRO6
Category	Recording Equipment
Language	English