Virtual DN780 Reverb effect 151
PRO6 Live Audio System
Owner’s Manual
The parameter controls give accurate adjustment of all reverberation parameters and
allow the engineer to create unique acoustic environments of virtually any type.
For more information on the Klark Teknik DN780, see Appendix D “Klark Teknik DN780
Reverb”.
Operation
The Virtual DN780 Reverb effect gives the operator enormous scope to use their
creative skills to the full. To achieve this, wide-ranging control is provided for all
parameters, although the basic operating procedure remains both simple and intuitive,
giving immediate access to a wide range of factory-set acoustic simulations. A
thorough understanding of this section will then enable the full capabilities of the Virtual
DN780 Reverb effect to be realised.
>> To choose an algorithm
Press the algorithm select button (see page 150) to highlight the algorithm you require;
the LEDs to the left of the algorithms show which one is selected. The settings in the
parameter display panel will update to suit the currently selected algorithm.
>> To create a new variation
After selecting the algorithm, its sound can be modified to suit a particular application
by changing one or more of the parameter controls situated underneath the parameter
display panel.
>> To store new variations
Each algorithm has its parameter settings stored in the PRO6. When the Virtual
DN-780 effect is used, the most recent settings for each algorithm are recalled. If you
need to return to the current settings of any algorithm at any point in show, you can
store them in the appropriate scene; see Chapter 30, “Automation”.
All of the algorithms are stored together, with each one containing the settings it had at
the time of store. If you want to use any algorithm, but with different settings, just
store the new settings.
>> To recall existing variations
Click on the scene containing the settings you require; see Chapter 30, “Automation”.
Special effects programs
The Virtual DN780 Reverb effect, unlike many reverberation-only devices, can run a
number of different effects programs. These cover a wide range of applications from
straight delay, through a variety of echo effects to the surreal sound of the Infinite
Room program.
The combination of excellent audio performance and digital signal processing power
results in a performance advantage over most existing effects and echo devices.
The effects programs, which are detailed in the following subsections, are available in
the reverb algorithms, while a subset of the parameters is available in the special FX
algorithms (Alive, Non-Linear, Reverse etc.).
>> To recall an effect
Press the algorithm select button on the front panel (see page 150) to select the
required effects program.
To Next Page
Loading...
Need help?
General
