PRO6 main processing functions 335
PRO6 Live Audio System
Owner’s Manual
Effects channel functions
Output channel band 1 Parametric operation
Frequency 16Hz to 25kHz swept
Gain +16dB to -16dB
BW 0.1 Oct to 3 Oct
Hi pass operation
Frequency 16Hz to 25kHz swept
Slope 6dB/Oct or 12dB/Oct
Shelf operation
Frequency 16Hz to 25kHz swept
Gain +16dB to -16dB
Mode soft curve
Output channel GEQ 16 available in place of PEQ (above)
31 bands, 1/3 Oct, proportional Q
Lo pass frequency 2kHz to 20kHz swept
Slope 6dB/Oct or 12dB/Oct
Hi pass frequency 20Hz to 500Hz swept
Slope 6dB/Oct or 12dB/Oct
Output channel dynamic Peak, linear, RMS, vintage and shimmer modes
(Corrective, Adaptive, Creative, Vintage and
Shimmer)
Threshold -50dBu to +25dBu
Attack 200µs to 20ms
Release 50ms to 3s
Ratio 25:1 to 1:1
Knee 4dB, 12dB or 40dB
Gain 0dB to +24dB
Side chain source selectable + filter
Frequency 50Hz to 15kHz swept
Bandwidth 1/3, 1 or 2 Oct
Stereo effects channel 8 available configurable as
Stereo or mono in, stereo out
Modulated delay effects
Complex delay, reverbs
Advanced dynamics
RTA and advanced measurements
Effects channel GEQ 32 available in place of effects (above)
31 bands, 1/3 Oct, proportional Q
Lo pass frequency 2kHz to 20kHz swept
Slope 6dB/Oct or 12dB/Oct
Hi pass frequency 20Hz to 500Hz swept
Slope 6dB/Oct or 12dB/Oct
To Next Page
Loading...
Need help?
General
