554 Appendix P: Parameters Copied Through Scenes
XL8 Live Performance System
Owner’s Manual
Comp./Output Dyn
Not applicable.
Gates
Not applicable.
EQs
Not applicable.
Aux Sends (1 to 16)
Not applicable.
Matrix Sends (1 to 16)
The following diagram shows the parameters of the mix processing area copied through
scenes.
Note: Although only matrix sends 1-2 are referenced above, this also applies to all 16
matrix sends.
Item Control Parameter
1 ON switch Matrix bus send on/off
2 level/pan control
knob
Bus level, or pan when bus is linked
3 PRE switch Pre-fader on/off
4 level control knob Bus level
1
3
1
3
4
4
2
2
1
3
1
3
4
Matrix buses
processing area
in GUI channel
strip