Midas PRO6

54 Chapter 7: Navigation
PRO6 Live Audio System
Owner’s Manual
Fault finding a problem channel
If you know the number of the channel that has a problem, you can quickly navigate it
to the control surface by typing in its channel type and number via the channel select
(lower) and channel type sections.
>> To navigate a channel using its number
1 In the channel type section, press the button corresponding to the channel’s
type. For example, if the channel is an input, press INPUT.
2 In the channel select (lower) section, type in the channel’s number. For
example, press 4 and then 7 for channel 47.
3 Press ENTER.