Milestone LOGOS One - Page 111

Milestone s.r.l.
MM098-002 – LOGOS ONE – Operator Manual
111
CHANGE THE CHARCOAL FILTER:
1. Open the six black knobs from the carter.
2. Then remove the filter’s chassis.
3. Now remove the black seal.
4. Remove the filter.
5. Replace the filter with the new one, place the black seal.
6. Close the chassis of the carter and screw the six knobs.
1
2
3
4
5
6
In case your LOGOS ONE is connected to an external fume extractor or to a fume hood,
the filter should be changed EVERY YEAR.
Otherwise, if there is no external extractor, we recommend to change it EVERY 6 MONTHS.