Milestone LOGOS One - Page 43

Milestone s.r.l.
MM098-002 – LOGOS ONE – Operator Manual
43
RINSINGS
Select Rinsings and set if user needs to:
 Load 1 or 2 rinsing tanks in the reagents configuration screen.
 Modify rinsings’s processed cassettes limit.
VOLUME
By default the settings is NORMAL, it is possible to lower or increase volume BUT for safety it is not possible
to totally silence it.
By default the Unit is set up to work with 1 rinsing tank. If you want to work with 2 rinsing
tanks, please contact Milestone Application department to change the group of program.
Dehydration limit x2: this is a default value for the expiration of rinsing reagent, please
don’t modify it.
If you need more information please contact Milestone Application department.