Milestone UltraGROSS - Page 138

UltraGROSS
MM182-001 – Operator Manual
138
5.13. MacroPATH licenses (only for letter C)
MacroPATH and MacroPATH BASIC are always supplied with a FULL license valid for a single PC.
If required, extra licenses may be bought for additional PCs that MacroPATH can be installed on (for example
on office PCs), which are not required to access Viewer mode only.
The two available licenses are:
CODE
370262F
MacroPATH 5 FULL
MacroPATH extra license FULL on USB key which includes:
- digital image acquisition in jpg format (only with Milestone camera connected),
- video acquisition in AVI format (only with Milestone camera connected),
- annotation options (measurements, specimens, hand drawings),
- audio file recordings in MP3 format,
- option of zooming in on previously saved images for closer examination,
- generation of file reports in RTF format compatible with WordPad or Microsoft Word Office,
- option of importing images from microscope through Twain protocol (only with Milestone
camera connected or using command row).
CODE
370262E
MacroPATH 5 EDIT
MacroPATH extra license EDIT on USB key which includes:
- annotation options (measurements, specimens, hand drawings)
- audio file recordings in MP3 format
- option of zooming in on previously saved images for closer examination
- generation of file reports in RTF format compatible with WordPad or Microsoft Word Office
5.14. LOOX Eye-Control for MacroPATH (only for letter C)
This optional part CODE 370635 allows you to visually check some MacroPath functions.
For its use, refer to the MM171 LOOX Eye-Control for MacroPATH operator manual supplied with the unit.