Miller Nitro 7310 - Starting the Unit; Normal Engine Starting; Run-In Procedure

4-OPERATINGINSTRUCTIONS
Startingtheunit
Normalenginestarting
Run-inProcedure
NOTICE:Aftertheenginestarts,operatetheengineat
lowidlespeedforafewminutessoenoughlubricant
reachestheturbochargerbearingsandengineparts
beforeoperatingtheengineatratedspeed.
NOTICE:Ifrun-ininstructionsforanewenginearenot
followed,damagetopistonringsandthecylinderbores
couldoccur.
Load
Duringthersteighthoursofoperatingthesprayerinthe
eld,operateatalowerspeedthannormal.Duringthe
next12operatinghours,theenginemustnotbeoperated
withexcessiveloadsatlowenginerevolutionsperminute
NOTICE:Donotoverloadtheengine.
Startup
Makesurethejoystickcontrolhandle(1)isinthe“Neutral”
position.Theparkbrake(2)mustbeengagedandthe
operatorisseatedintheoperator’sseat.
NOTE:Thestarterwillnotengageunlessthejoystickcon-
trolhandleisinthe“Neutral”positionandtheparkbrake
isengagedandtheoperatorisseatedintheoperator’s
seat.
RAIL17SP00287AA1
Soundthehornbypushingontheendoftheturnsignal
leverbeforestartingtheengine.Turntheignitionswitch
(1)fromtheOFFpositiontotheONposition.Pushthe
START/STOPbutton(2)tostarttheengine.
RAIL17SP00263AA2
4-4