Mindray Consona N6 - 6.2 B Mode; 6.2.1 B-mode Image Scanning

6 - 4 Operator’s Manual
6 Image Acquisition
• Click [Advanced]. The value to TIC/TIB/TIS can be set.
• Click [Advanced], and then enable [Sampling Line Displaying]. The sampling line always
appears after being set when entering PW/M/TVM mode for once. Press <PW>/<M>to enter
the corresponding mode one time.
3D4D Preset Manager
Click [3D4D Preset Manager].
• Level: displays the scenario and subpreset item of the currently activated probe and exam
mode. The scenario and subpreset item can be renamed or restored to factory settings.
• Scenario and Subpreset: the item can be deleted, added, and set to default active item, and the
position can be adjusted.
• Click [Show Scenario Parameters] and [Show Subpreset Parameters] to view the Scenario and
Subpreset parameters.
TIP:
It is unavailable for frozen dual-probe mode.
6.2 B Mode
B mode is the basic imaging mode that displays real-time views of anatomical tissues and organs.
6.2.1 B-mode Image Scanning
Enter the patient information, and select the appropriate probe and exam mode.
If the system is in other imaging mode, press <B> to return B mode.
Adjust parameters to optimize the image.
No. Item Description
1. Delete Delete a selected scenario or subpreset.
2. Add Click a blank button, and select a desired scenario or subpreset under
the currently activated probe and exam mode.
3. Set to active Set a scenario or subpreset to the default active item.
4. Move to left/
right
Move a scenario or subpreset to the left or right.
2341