14 Measurement, Comments and Body Mark
Operator’s Manual 14 - 7
14.3.1 Voice Comment Panel
After the system enters the voice comment status, the voice comment panel will be displayed on the
lower right corner of the screen.
14.3.2 Adding Voice Comments
• In voice comment recording status, you can perform measurements, comments adding, body
marks adding, print tasks and DICOM tasks.
• If you press <Freeze> during the recording course, the already recorded voice comment cannot
be saved.
1. Connect the Microphone material kit to the USB port.
2. Press <Freeze> after obtaining the image. Press <Cursor> and roll the trackball to move the
cursor onto the voice comment panel; tap to start recording and the icon becomes red.
3. After the voice recording ends, tap the icon to end recording.
4. Save the cine.
14.3.3 Voice Comment Review
Click to open a cine file with voice comment, and during the cine review mode, voice comments
are played as well.
14.4 Body Mark
After powering off, the system will clear all comments on the image.
The Body Mark feature is used for indicating the exam position of the patient and transducer
position and orientation.
You can preset the system configured general body marks for each exam mode. The system
supports the import of user-defined body marks.
14.4.1 Touch Screen Display in Body Mark
The body mark touch screen displays the settings for the current mode:
1 Recording 2 Start Play
3 Start/Stop Recording 4 Duration
To Next Page
Loading...
