7 - 26 Operator’s Manual
7 3D/4D
8. Do operations like comment to the interested region.
9. Save images as necessary.
iPage+SCV operation
Adjust the parameter [Thickness] when SCV imaging is needed.
7.12.2 Basic Screen & Operation
Layout
The system supports several types of displaying layout: 2*2, 3*3, 4*4 and 5*5, touch the
corresponding icon on the touch screen to select, and the selection [Slices Number] changes
accordingly.
Reference image
Tap [A], [B], or [C] to select the reference image.
Slice and slice line
• Central slice: the central slice line corresponding plane are the central slice, which is marked
with a green “*” at the upper left corner of the image.
• Tap to place the slice lines vertically, and touch to place the slice lines horizontally.
• Active slice: the green slice line corresponding plane is the active slice, which is marked with a
green box. The default active slice is the central slice.
1
A plane (the current
reference image)
2B plane 3
C plane
4
Central slice line
(Current active slice)
5 Slice line 6
Space between two
slice lines
7
Y- ax i s 8 X -a x is 9
Slice position (to the
central slice)
10
Slice order number 11 Central slice mark 12
Active slice be
highlighted in green
To Next Page
Loading...
