Mindray Consona N6 - 4.1.11 Scan Code Preset

4 Setup
Operator’s Manual 4 - 13
Auto Lock Machine
To set the waiting time before the system enters locked status in the drop-down list beside “Wait”.
The system will be locked automatically if the system waiting time exceeds the duration already
set.
4.1.11 Scan Code Preset
Set the code parameters for barcode reader.
1-dimension barcode reader (1D)
2-dimension barcode reader (2D)
• General Analysis Mode
Select “General” from “Analysis Mode” drop-down list: The scan codes consist of Patient ID,
Other ID, Patient Name, Birth, etc.
Item Description
Scan Item After scanning 1D bar code, the regular expression is matched in the priority
order: “Patient ID > Other ID > Last name > Last name > Middle name >
Accession #> Operator > Diagnostician”. If the regular expression is matched
successfully, the data of 1D bar code will be displayed in this item in Patient page
automatically.
Example: The data of the bar code is 123 after scanning 1D bar code. The regular
expression is matched in the priority order: “Patient ID > Other ID > Last name >
Last name > Middle name > Accession #> Operator > Diagnostician”. If the
regular expression of “Other ID” is matched successfully, “123” will be displayed
in “Other ID” item in Patient page automatically.
Regular
Expression
Set the regular expression according to the bar code format.
Move Up/
Down
Move up or Move down a selected item.
Add/Delete Add or delete a selected item. (Only the default item can be added or deleted.)
Load default Restore the parameter value to the default value.
Item Description
Scan Barcode Example Input a barcode example, barcode example is separated by separators
(the separator is used to set the start and end position of each item), and
the barcode data is displayed in the following items in turn.