4 - 12 Operator’s Manual
4 Setup
LDAP Privilege Management
Turn on the access control function and log in to the system as Administrator before you edit
privileges for the LDAP (Lightweight Directory Access Protocol) users.
Click [LDAP Config]
Enable strong
password
Enable strong password to improve security.
• If the strong password is enabled and you
log in to the system with the account that is
added before the strong password is
enabled, the system prompts a warning
message to inform you whether your
password conforms to the password policy.
The administrator can change password for
administrator or operator.
• If the strong password is enabled and you
add a new user account, the system prompt
an error message to inform you that the
password is too weak. please modify the
password according to the error message.
/
Item Description Remark
Item Description
Server Address Enter the server address in the field box after accessing the network.
Test LDAP Server Click [Test LDAP Server] to test whether the LDAP server is accessible. If
the LDAP is accessible, the system prompts the following message "Server
test succeeded."
Root DN It is automatically displayed after the server is successfully tested.
Days to keep
cached password
Set days to keep the cached passwords in the local system.
Users can log in to the server even without accessing the network within the
setting days.
• Empty: the passwords are kept in the local system permanently.
• 0: no passwords are kept in the local system.
• >1: for example, if it is set to 5, the passwords are kept in the local system
for 5 days.
Member and
privileges
• Adding a user: Enter the member name, and select or deselect privileges
from the drop-down list of "Privilege". Click [Add], and the new members
and privileges will appear in the list above.
• Deleting a user: Select a member to be deleted, and click [Delete].
• Modifying the member name or privileges: Select a member to be
modified, modify the member name, and select or deselect privileges from
the drop-down list of "Privilege". Click [Modify], and the modified
member name and privileges will appear in the Member of filter list.
Logon Test 1. Enter the User name and password in the field boxes of the Authentication
test area.
2. Click [Logon Test] to test whether the user is authenticated. After
successful authentication, the system prompts a successful authentication
message.
To Next Page
Loading...
