3 System Preparation
Operator’s Manual 3 - 11
3. Add a print service:
a. In B mode, click > [Setup] on the touch screen, select [Print].
b. Click [Add Service] to enter the page.
c. Select the service type and enter the service name manually.
d. Click [OK] to return to the page.
e. Select the target printer from the drop-down list in the “Property” box and set other
printing properties.
f. Click [OK] to complete.
3.8.5 Connecting a Wireless Printer
The system supports the wireless graph/text printer for the report print.
Perform the following procedure:
1. Power on the system and the printer.
2. Make sure the ultrasound machine and the printer are connected to a same LAN, and turned on
the Wi-Fi function of the printer.
3. In B mode, click > [Setup] on the touch screen, select [Print] to choose the report to be
printed. Select the printer from the wireless printer list, and set the printer.
4. Click [Interval Time(Sec)] to exit the preset and make the settings effective.
3.8.6 iVocal
Insert the iVocal microphone device to the USB port of the ultrasound system. The system
automatically enters the following page.
Setup
Select to enter the iVocal Setup menu.
No. Description
1 Click to speak to the microphone (the system recognizes the vocal order). The
system conducts the operations after recognizing the voice.
2 Click to stop the voice Recognition.
3 Click to open the Setup menu.
To Next Page
Loading...
