4 Setup
Operator’s Manual 4 - 9
Other Settings
4.1.7 Key Board
The preset screen is displayed only when the standard keyboard is configured.
You can set the functions for the F keys of the key board. The method is similar to setting
Console&Footswitch, see “4.1.6 Console&Footswitch”.
4.1.8 Gesture
1. Click to select the desired gesture in the Key Function column on the left side of the page.
2. Click to select a function in the Function area. You can see the available functions selected on
the right side.
3. Click [OK] to complete the function setting.
4.1.9 Output
Set the output format, the range and the resolution for the image.
Item Description
Control Panel
Brightness
To set the brightness for control panel key.
Trackball Speed To set the speed of the trackball when moving the trackball.
Key Volume To set the key volume at 3 levels, 0 means no sound.
Touch Screen Volume To set the touch screen volume at 3 levels.
Type Item Description
AVI Encode Encode Quality: To set the image quality of unloaded AVI. The system
unloads according to the settings.
The higher the image quality is, the clearer the unloaded
image is. The unloading speed become slower with the
larger space.
Operating System
Compatibility:
To set the unloading format of the AVI. The system
unloads according to the settings.
If checking “Mac OS”, saving CIN files to USB flash
drive as “MP4 Video”.
SendTo Frame Rate: To set whether to enable/disable compression of images.
Analog Output Output Size: Select the output size: Classic or Standard.
Output Mode: Select the format to output/separate the video format:
NTSC or PAL.
Digital Output Output Size: Select the output size: Full Screen, Standard or Classic.
Resolution: Select VGA, HDMI output image resolution.
To Next Page
Loading...
