Mindray Consona N6 - 2.12.4 Touch Screen

2 - 18 Operator’s Manual
2 System Overview
Menus of different modes display in real-time at the upper left corner of the screen.
Operate the menu by the trackball and left/right <Set> key.
1. Press <Cursor> to show the cursor.
2. Roll the trackball to locate the cursor onto the item to be adjusted.
– For a commanding item or command optional item: press <Set> to directly activate the
item.
– For a parameter item or ON/OFF item: press <Set> to activate the item, and press <Set>
to switch among the available values.
– For a parameter optional item: press <Set> to extend the available parameter the cursor is
positioned onto the list. Roll the trackball to locate the cursor onto the item to be adjusted,
and press <Set> to set the value.
2.12.4 Touch Screen
Mapping mode of touch screen
1 Menu title 2 Menu item
1
2
Operation area Operations
1 Flick the edge downwards to enter the mapping mode.
2 Sweep to right to open the menus under the mapping mode.
23
4
1