4 Setup
Operator’s Manual 4 - 15
Worklist Options
• Select “Worklist Server” from the drop-down list, and the system searches the Worklist server
according to the scanned data.
• Select “No” from the drop-down list, and the system creates a new exam in the Patient page
according to the scanned data.
Worklist Default
• Select a default item for searching the Worklist server.
For example, users select “Patient ID” from the drop down list of “Worklist Default”, and the
system searches Patient ID in the Worklist server.
• Select “No”, and the system searches the Worklist server in the priority order: “Patient ID” >
“Last name” > “Accession #”.
The matching priority order is 2D item, 1D item, and Default Item, after the 1D/2D and default
items are configured.
4.1.12 WorkStation
This page is used to set the quick key for sending image or cine to Workstation.
4.2 Exam Mode Preset
You can assign available exam modes for probes.
Perform the following procedure:
1. To select a probe, move the cursor over the Probe column and select the probe model using the
drop-down list.
2. Select/delete exam modes:
On the left side, you can view all the available exam modes in the exam library for the probe.
On the right side of the screen, you can view the current exam modes assigned to the probe.
– Click [>]: add a selected exam mode in the [Exam Mode Library] to the [Probe and Exam
Mode] list.
– Click [<]: add a selected exam mode in the [Probe and Exam Mode] to the [Exam Mode
Library] list.
– Click [>>]: add all exam modes in the library to the [Probe and Exam Mode] list.
– Click [<<]: add all probe and exam modes in the library to the [Exam Mode Library] list.
– Click [Delete] to delete a user-defined exam in the Exam Mode Library area.
– Click [Default] to set a selected exam mode as the default exam mode. The default exam
mode is marked by a “√”.
4.3 Measurement Preset
“Exam Mode XX” on the upper left side refers to the currently configured exam mode. The
configured general/application menus are only related to the current exam mode.
There are three kinds of measurement items.
To Next Page
Loading...
